Tennessee·Production Occupations·SOC 51-4034

Best programs to become a lathe and turning machine tool setter in Tennessee

21 Tennessee schools offer programs that train lathe and turning machine tool setters, operators, and tenders, metal and plastic, graduating 254 people a year. The job pays a median of $40,730 in Tennessee across about 700 jobs (BLS OEWS May 2025).

You do not need a college degree to become a lathe and turning machine tool setter. The field of study that leads most directly to this job in Tennessee is Machine Tool Technology/Machinist (IPEDS completions). BLS lists a high school diploma or equivalent as the typical entry-level education.

Set up, operate, or tend lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire, rod, or bar.

Also calledLathe OperatorSetup OperatorMachine OperatorCNC Lathe Operator (Computer Numerical Control Lathe Operator)ChaserHobberPlanerChucker
Graduates / yr
254
in Tennessee
Median pay · Tennessee
$40,730
BLS OEWS May 2025
Jobs in state
700
people employed
Schools
21
with a feeder program
Avg graduation rate
74%
across those schools
Median net price
$15,789
per year, IPEDS

1 program in Tennessee that leads to this job

Ranked by graduates per year in Tennessee (IPEDS completions). Graduate earnings and debt are national College Scorecard figures reported at the 4-digit CIP level, so specializations within one field share a figure. Each program also links to its own Tennessee page.

Degree programs that lead to this occupation, ranked by graduates per year
#ProgramGraduates / yrShare of pipelineSchoolsGrad earnings (1 yr)Median debt
1
CIP 48.0501In Tennessee →
254
100.0%
21$36,566$9,429

Top 21 schools in Tennessee

Ranked by graduates per year into this job. Graduate earnings are reported for 18 of the 21 schools in this state.

Schools ranked by graduates per year into this occupation
#SchoolGraduates / yrTop feeder programGrad earnings (1 yr)Grad rateNet priceAcceptance
1Tennessee College of Applied Technology - Murfreesboro
Murfreesboro, TN Public · 1 feeder program
26Machine Tool Technology/Machinist$42,68876%——
2Tennessee College of Applied Technology Nashville
Nashville, TN Public · 1 feeder program
24Machine Tool Technology/Machinist$34,29570%——
3Tennessee College of Applied Technology - Shelbyville
Shelbyville, TN Public · 1 feeder program
24Machine Tool Technology/Machinist$40,60581%——
4Tennessee College of Applied Technology - Memphis
Memphis, TN Public · 1 feeder program
22Machine Tool Technology/Machinist$34,75055%——
5Tennessee College of Applied Technology - Hartsville
Hartsville, TN Public · 1 feeder program
18Machine Tool Technology/Machinist$36,28382%——
6William R Moore College of Technology
Memphis, TN Private not-for-profit · 1 feeder program
18Machine Tool Technology/Machinist—50%$15,789—
7Tennessee College of Applied Technology - Morristown
Morristown, TN Public · 1 feeder program
15Machine Tool Technology/Machinist$38,09680%——
8Tennessee College of Applied Technology - Dickson
Dickson, TN Public · 1 feeder program
13Machine Tool Technology/Machinist—74%——
9Tennessee College of Applied Technology Northwest
Newbern, TN Public · 1 feeder program
12Machine Tool Technology/Machinist$34,72869%——
10Tennessee College of Applied Technology - Elizabethton
Elizabethton, TN Public · 1 feeder program
11Machine Tool Technology/Machinist$32,92081%——
11Tennessee College of Applied Technology - Jacksboro
Jacksboro, TN Public · 1 feeder program
11Machine Tool Technology/Machinist$33,00884%——
12Tennessee College of Applied Technology - Harriman
Harriman, TN Public · 1 feeder program
10Machine Tool Technology/Machinist$30,92469%——
13Tennessee College of Applied Technology - Jackson
Jackson, TN Public · 1 feeder program
9Machine Tool Technology/Machinist$43,86480%——
14Tennessee College of Applied Technology - Henry/Carroll
Paris, TN Public · 1 feeder program
8Machine Tool Technology/Machinist$25,71375%——
15TCAT Athens
Athens, TN Public · 1 feeder program
7Machine Tool Technology/Machinist$35,91395%——
16Tennessee College of Applied Technology Crump
Crump, TN Public · 1 feeder program
6Machine Tool Technology/Machinist$31,73163%——
17Tennessee College of Applied Technology - McMinnville
McMinnville, TN Public · 1 feeder program
6Machine Tool Technology/Machinist$33,35367%——
18Tennessee College of Applied Technology - Livingston
Livingston, TN Public · 1 feeder program
5Machine Tool Technology/Machinist$18,70678%——
19Tennessee College of Applied Technology - Knoxville
Knoxville, TN Public · 1 feeder program
4Machine Tool Technology/Machinist$39,05471%——
20Tennessee College of Applied Technology - Upper Cumberland
Crossville, TN Public · 1 feeder program
3Machine Tool Technology/Machinist$35,28884%——
21Tennessee College of Applied Technology - Oneida - Huntsville
Huntsville, TN Public · 1 feeder program
2Machine Tool Technology/Machinist—74%——

All 21 schools in Tennessee

Every school in Tennessee with a program that feeds this job, ordered by graduates per year. Earnings are shown for the ranked schools above; open a school profile for the rest.

Fields of study in Tennessee that lead to this job

Grouped at the 4-digit CIP level. Numbers are graduates per year in this state.

What lathe and turning machine tool setters, operators, and tenders, metal and plastic earn in Tennessee

What people already working in this job earn (BLS OEWS May 2025). Not graduate earnings.

Median annual in Tennessee
$40,730
Mean annual
$45,320
Jobs in state
700
What the range looks like
10th pct$35,080Median$40,73090th pct$59,910
Versus the national median
-19.5%

U.S. median $50,620. Tennessee pays below the national figure.

Job concentration
1.99×

Concentrated here: Tennessee employs more of this job per worker than the U.S. average.

Metro areas in Tennessee

Nashville-Davidson--Murfreesboro--Franklin, TN
$51,850median
150 jobs
Chattanooga, TN-GA
$39,720median
30 jobs

Job outlook

Bureau of Labor Statistics Employment Projections, 2024 to 2034.

Projected growth 2024–34
-13.6%
Decline
Openings per year
1,500
new jobs plus replacements
Employment change
-2,600
18,900 → 16,400
Typical entry education
High school diploma or equivalent
Plus moderate-term on-the-job training

Growth and openings are national. The Bureau of Labor Statistics does not publish employment projections at state level, so these figures describe the occupation across the whole U.S., not this state alone.

How to get in

The full skills and day-to-day breakdown lives on the national Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic page.

How to become a lathe and turning machine tool setter

Typical entry education
High school diploma or equivalent
On-the-job training
Moderate-term on-the-job training

The same job in other states

Where else this occupation employs the most people, and what it pays there.

Related careers in Tennessee

Every major mapped to this job

The official federal mapping behind the rankings above.

All 1 majors mapped to Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic1 of them graduated someone in the latest IPEDS year. NCES CIP 2020 → SOC 2018 crosswalk.+
  • 48.0501Machine Tool Technology/Machinist

Common questions

Answers for people weighing lathe and turning machine tool setters, operators, and tenders, metal and plastic programs in Tennessee.

What degree do you need to become a lathe and turning machine tool setter?+

You do not need a college degree to become a lathe and turning machine tool setter. The field of study that leads most directly to this job in Tennessee is Machine Tool Technology/Machinist (IPEDS completions). BLS lists a high school diploma or equivalent as the typical entry-level education.

Which college majors lead to becoming a lathe and turning machine tool setter?+

The field of study that leads most directly to this job in Tennessee is Machine Tool Technology/Machinist (IPEDS completions). In all, 1 feeder program graduates about 254 people a year in Tennessee (IPEDS completions).

How much do lathe and turning machine tool setters, operators, and tenders, metal and plastic earn in Tennessee?+

The median is $40,730 a year (BLS OEWS May 2025). That is 19.5% below the U.S. median of $50,620. This is pay for people already working in the occupation, not the same thing as graduate earnings one year after finishing a degree.

Is demand for lathe and turning machine tool setters, operators, and tenders, metal and plastic growing?+

BLS projects a -13.6% change in employment between 2024 and 2034, decline, with roughly 1,500 openings a year nationally once retirements and job changes are counted.

How many schools offer programs for this career in Tennessee?+

21 institutions in Tennessee reported graduates from at least one of the 1 program that feed this occupation in IPEDS 2024-25. Rankings on this page use graduates per year, because the federal data publishes no enrollment count by program.

What other job titles do lathe and turning machine tool setters, operators, and tenders, metal and plastic work under?+

Employers advertise this work under many names. O*NET records Lathe Operator, Setup Operator, Machine Operator, CNC Lathe Operator (Computer Numerical Control Lathe Operator) among the most commonly reported, all mapping to SOC 51-4034.

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic in other statesCaliforniaSouth CarolinaTexasKansasColoradoOklahomaWisconsinMinnesota

About the data on this page

Rankings use IPEDS completions 2024–25, degrees awarded per year. That is the closest federal measure of how many people a program puts into a career, because no federal dataset publishes enrollment by program. Wages and employment come from BLS OEWS May 2025, growth and openings from BLS Employment Projections 2024-34, and which majors lead to which jobs from the NCES CIP 2020 to SOC 2018 crosswalk. Occupation descriptions, tasks, skills and tools are O*NET 30.3 (CC BY 4.0, U.S. Department of Labor/ETA).

  • BLS Occupational Employment & Wage Statistics

    May 2025

    Wages, employment counts, location quotients and metro breakdowns.

  • BLS Employment Projections

    2024–34

    Projected growth, annual openings and typical entry-level education.

  • IPEDS Completions

    2024-25 (provisional)

    Graduates per year by program and institution — the ranking metric.

  • College Scorecard, Field of Study

    2020-21 cohorts

    Median graduate earnings one year after completion, and median debt.

  • Census Post-Secondary Employment Outcomes

    latest available

    Graduate earnings 1/5/10 years out, where the state participates.

  • NCES CIP 2020 and the CIP-to-SOC 2018 crosswalk

    CIP 2020 / SOC 2018

    Which college programs officially lead to this occupation.

  • O*NET Database 30.3

    30.3

    Tasks, skills, knowledge, tools, job zone and alternate job titles.

    Official source →CC BY 4.0, U.S. Department of Labor / ETA

All Clema data sources and release dates →

Explore every U.S. college in one conversation

Clema turns plain-language questions into sourced answers across every U.S. institution — earnings, aid, acceptance, graduation, safety, and athletics from IPEDS, College Scorecard, and 10+ federal datasets, built in.

Free for teams up to 3 · No credit card