Colorado·Architecture and Engineering Occupations·SOC 17-3028

Best Calibration Technologist programs in Colorado, ranked by enrollment

Execute or adapt procedures and techniques for calibrating measurement devices, by applying knowledge of measurement science, mathematics, physics, chemistry, and electronics, sometimes under the direction of engineering staff.

5 schools in Colorado run programs that feed this job, graduating 65 people a year. The job pays a median of $63,660 in Colorado across about 260 jobs (BLS OEWS May 2025).

Also calledTest TechnicianCalibration EngineerEquipment TechnicianHydrometer CalibratorInstrument TechnicianCalibration SpecialistCalibration TechnicianElectronics Technician
Graduates / yr
65
in Colorado
Median pay · Colorado
$63,660
BLS OEWS May 2025
Jobs in state
260
people employed
Schools
5
with a feeder program
Avg graduation rate
42%
across those schools
Median net price
per year, IPEDS

Fields of study in Colorado that lead to this job

Grouped at the 4-digit CIP level. Numbers are graduates per year in this state.

2 programs in Colorado that lead to this job

Ranked by graduates per year in Colorado (IPEDS completions). Graduate earnings and debt are national College Scorecard figures reported at the 4-digit CIP level, so specializations within one field share a figure. Each program also links to its own Colorado page.

Degree programs that lead to this occupation, ranked by graduates per year
#ProgramGraduates / yrShare of pipelineSchoolsGrad earnings (1 yr)Median debt
1
CIP 15.0303In Colorado
64
98.5%
4$59,859$15,372
2
CIP 15.0404In Colorado
1
1.5%
1$60,286$15,383

Top 5 schools in Colorado

Ranked by graduates per year into this job. Graduate earnings are reported for 1 of the 5 schools in this state.

Schools ranked by graduates per year into this occupation
#SchoolGraduates / yrTop feeder programGrad earnings (1 yr)Grad rateNet priceAcceptance
1Front Range Community College
Westminster, CO Public · 1 feeder programs
29Electrical, Electronic, and Communications Engineering Technology/Technician35%
2Metropolitan State University of Denver
Denver, CO Public · 1 feeder programs
17Electrical, Electronic, and Communications Engineering Technology/Technician$75,96632%99%
3Pickens Technical College
Aurora, CO Public · 1 feeder programs
17Electrical, Electronic, and Communications Engineering Technology/Technician76%
4Morgan Community College
Fort Morgan, CO Public · 1 feeder programs
1Instrumentation Technology/Technician45%
5Pikes Peak State College
Colorado Springs, CO Public · 1 feeder programs
1Electrical, Electronic, and Communications Engineering Technology/Technician21%

All 5 schools in Colorado

Every school in Colorado with a program that feeds this job, ordered by graduates per year. Earnings are shown for the ranked schools above; open a school profile for the rest.

All schools in Colorado that feed this occupation
SchoolCityControlGraduates / yrFeeder programs
Front Range Community CollegeWestminsterPublic291
Metropolitan State University of DenverDenverPublic171
Pickens Technical CollegeAuroraPublic171
Morgan Community CollegeFort MorganPublic11
Pikes Peak State CollegeColorado SpringsPublic11

What calibration technologists and technicians earn in Colorado

What people already working in this job earn (BLS OEWS May 2025). Not graduate earnings.

Median annual in Colorado
$63,660
Mean annual
$73,410
Jobs in state
260
What the range looks like
10th pct$48,860Median$63,66090th pct$103,070
Versus the national median
-6.1%

U.S. median $67,820. Colorado pays below the national figure.

Job concentration
0.84×

1.00× means the state has its expected share of these jobs.

Metro areas in Colorado

Boulder, CO
$73,100median
40 jobs
Fort Collins-Loveland, CO
$63,660median
Denver-Aurora-Centennial, CO
$58,180median
90 jobs

Job outlook

Bureau of Labor Statistics Employment Projections, 2024 to 2034.

Projected growth 2024–34
+4.7%
About as fast as average
Openings per year
1,400
new jobs plus replacements
Employment change
700
15,800 → 16,500
Typical entry education
Associate's degree

Growth and openings are national. The Bureau of Labor Statistics does not publish employment projections at state level, so these figures describe the occupation across the whole U.S., not this state alone.

How to get in

The full skills, tools, and day-to-day breakdown lives on the national Calibration Technologists and Technicians page.

How to become a Calibration Technologist

Job zone 3 of 5 · SVP 6.0 to < 7.0
Typical entry education
Associate's degree

Most occupations in this zone require training in vocational schools, related on-the-job experience, or an associate's degree.

Previous work-related skill, knowledge, or experience is required for these occupations. For example, an electrician must have completed three or four years of apprenticeship or several years of vocational training, and often must have passed a licensing exam, in order to perform the job.

Employees in these occupations usually need one or two years of training involving both on-the-job experience and informal training with experienced workers. A recognized apprenticeship program may be associated with these occupations.

The same job in other states

Where else this occupation employs the most people, and what it pays there.

Related careers in Colorado

Every major mapped to this job

The official federal mapping behind the rankings above.

All 3 majors mapped to Calibration Technologists and Technicians3 of them graduated someone in the latest IPEDS year. NCES CIP 2020 → SOC 2018 crosswalk.+
  • 15.0303Electrical, Electronic, and Communications Engineering Technology/Technician
  • 15.0401Biomedical Technology/Technician
  • 15.0404Instrumentation Technology/Technician

Common questions

Answers for people weighing calibration technologists and technicians programs in Colorado.

What degree do you need to become a Calibration Technologist?+

Associate's degree is the typical entry-level education BLS reports for this occupation. The most common program people actually graduate from is Electrical, Electronic, and Communications Engineering Technology/Technician, which awarded 64 degrees in Colorado in 2024-25, 98.5% of everyone graduating from a program that feeds this career.

Which college majors lead to becoming a Calibration Technologist?+

The NCES CIP-to-SOC crosswalk maps 2 programs to this occupation. The largest are Electrical/Electronic Engineering Technologies/Technicians, Electromechanical Technologies/Technicians. Together they graduate about 65 people a year in Colorado.

How much do calibration technologists and technicians earn in Colorado?+

The median is $63,660 a year (BLS OEWS May 2025). That is 6.1% below the U.S. median of $67,820. This is pay for people already working in the occupation, not the same thing as graduate earnings one year after finishing a degree.

Is demand for calibration technologists and technicians growing?+

BLS projects a +4.7% change in employment between 2024 and 2034, about as fast as average, with roughly 1,400 openings a year nationally once retirements and job changes are counted.

How many schools offer programs for this career in Colorado?+

5 institutions in Colorado reported graduates from at least one of the 2 programs that feed this occupation in IPEDS 2024-25. Rankings on this page use graduates per year, because the federal data publishes no enrollment count by program.

Do you need training or experience beyond a degree?+

BLS lists 'None' for related work experience and 'None' for on-the-job training typically needed to reach competency.

Calibration Technologists and Technicians in other statesTexasIllinoisVirginiaLouisianaCaliforniaFloridaOhioNew York

About the data on this page

Rankings use IPEDS completions 2024–25, degrees awarded per year. That is the closest federal measure of how many people a program puts into a career, because no federal dataset publishes enrollment by program. Wages and employment come from BLS OEWS May 2025, growth and openings from BLS Employment Projections 2024-34, and which majors lead to which jobs from the NCES CIP 2020 to SOC 2018 crosswalk. Occupation descriptions, tasks, skills and tools are O*NET 30.3 (CC BY 4.0, U.S. Department of Labor/ETA).

  • BLS Occupational Employment & Wage Statistics

    May 2025

    Wages, employment counts, location quotients and metro breakdowns.

  • BLS Employment Projections

    2024–34

    Projected growth, annual openings and typical entry-level education.

  • IPEDS Completions

    2024-25 (provisional)

    Graduates per year by program and institution — the ranking metric.

  • College Scorecard, Field of Study

    2020-21 cohorts

    Median graduate earnings one year after completion, and median debt.

  • Census Post-Secondary Employment Outcomes

    latest available

    Graduate earnings 1/5/10 years out, where the state participates.

  • NCES CIP 2020 and the CIP-to-SOC 2018 crosswalk

    CIP 2020 / SOC 2018

    Which college programs officially lead to this occupation.

  • O*NET Database 30.3

    30.3

    Tasks, skills, knowledge, tools, job zone and alternate job titles.

    Official source →CC BY 4.0, U.S. Department of Labor / ETA

All Clema data sources and release dates →

Explore every U.S. college in one conversation

Clema turns plain-language questions into sourced answers across every U.S. institution — earnings, aid, acceptance, graduation, safety, and athletics from IPEDS, College Scorecard, and 10+ federal datasets, built in.

Free for teams up to 3 · No credit card