Best Heat Treating Equipment Setter programs in Wisconsin, ranked by enrollment
Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, soaking pits, or vacuum equipment to temper, harden, anneal, or heat treat metal or plastic.
13 schools in Wisconsin run programs that feed this job, graduating 235 people a year. The job pays a median of $49,100 in Wisconsin across about 470 jobs (BLS OEWS May 2025).
Fields of study in Wisconsin that lead to this job
Grouped at the 4-digit CIP level. Numbers are graduates per year in this state.
2 programs in Wisconsin that lead to this job
Ranked by graduates per year in Wisconsin (IPEDS completions). Graduate earnings and debt are national College Scorecard figures reported at the 4-digit CIP level, so specializations within one field share a figure. Each program also links to its own Wisconsin page.
| # | Program | Graduates / yr | Share of pipeline | Schools | Grad earnings (1 yr) | Median debt |
|---|---|---|---|---|---|---|
| 1 | CIP 48.0501In Wisconsin → | 142 | 60.4% | 12 | $36,566 | $9,429 |
| 2 | CIP 48.0503In Wisconsin → | 93 | 39.6% | 3 | $36,566 | $9,429 |
Top 13 schools in Wisconsin
Ranked by graduates per year into this job. Graduate earnings are reported for 12 of the 13 schools in this state.
| # | School | Graduates / yr | Top feeder program | Grad earnings (1 yr) | Grad rate | Net price | Acceptance |
|---|---|---|---|---|---|---|---|
| 1 | Northeast Wisconsin Technical College Green Bay, WI Public · 1 feeder programs | 47 | Machine Shop Technology/Assistant | $41,421 | 51% | — | — |
| 2 | Waukesha County Technical College Pewaukee, WI Public · 2 feeder programs | 42 | Machine Tool Technology/Machinist | $43,380 | 44% | — | — |
| 3 | Fox Valley Technical College Appleton, WI Public · 2 feeder programs | 38 | Machine Shop Technology/Assistant | $53,507 | 65% | — | — |
| 4 | Chippewa Valley Technical College Eau Claire, WI Public · 1 feeder programs | 22 | Machine Tool Technology/Machinist | $48,638 | 50% | — | — |
| 5 | Northwood Technical College Rice Lake, WI Public · 1 feeder programs | 19 | Machine Tool Technology/Machinist | $42,282 | 56% | — | — |
| 6 | Madison Area Technical College Madison, WI Public · 1 feeder programs | 18 | Machine Tool Technology/Machinist | $37,860 | 29% | — | — |
| 7 | Lakeshore Technical College Cleveland, WI Public · 1 feeder programs | 15 | Machine Tool Technology/Machinist | $48,619 | 50% | — | — |
| 8 | Northcentral Technical College Wausau, WI Public · 1 feeder programs | 11 | Machine Tool Technology/Machinist | $47,718 | 45% | — | — |
| 9 | Mid - State Technical College Wisconsin Rapids, WI Public · 1 feeder programs | 9 | Machine Tool Technology/Machinist | $38,653 | 52% | — | — |
| 10 | Moraine Park Technical College Fond du Lac, WI Public · 1 feeder programs | 7 | Machine Tool Technology/Machinist | $41,073 | 58% | — | — |
| 11 | Milwaukee Area Technical College Milwaukee, WI Public · 1 feeder programs | 4 | Machine Tool Technology/Machinist | — | 25% | — | — |
| 12 | Southwest Wisconsin Technical College Fennimore, WI Public · 1 feeder programs | 2 | Machine Tool Technology/Machinist | $35,167 | 66% | — | — |
| 13 | Western Technical College La Crosse, WI Public · 1 feeder programs | 1 | Machine Tool Technology/Machinist | $40,624 | 34% | — | — |
All 13 schools in Wisconsin
Every school in Wisconsin with a program that feeds this job, ordered by graduates per year. Earnings are shown for the ranked schools above; open a school profile for the rest.
| School | City | Control | Graduates / yr | Feeder programs |
|---|---|---|---|---|
| Northeast Wisconsin Technical College | Green Bay | Public | 47 | 1 |
| Waukesha County Technical College | Pewaukee | Public | 42 | 2 |
| Fox Valley Technical College | Appleton | Public | 38 | 2 |
| Chippewa Valley Technical College | Eau Claire | Public | 22 | 1 |
| Northwood Technical College | Rice Lake | Public | 19 | 1 |
| Madison Area Technical College | Madison | Public | 18 | 1 |
| Lakeshore Technical College | Cleveland | Public | 15 | 1 |
| Northcentral Technical College | Wausau | Public | 11 | 1 |
| Mid - State Technical College | Wisconsin Rapids | Public | 9 | 1 |
| Moraine Park Technical College | Fond du Lac | Public | 7 | 1 |
| Milwaukee Area Technical College | Milwaukee | Public | 4 | 1 |
| Southwest Wisconsin Technical College | Fennimore | Public | 2 | 1 |
| Western Technical College | La Crosse | Public | 1 | 1 |
What heat treating equipment setters, operators, and tenders, metal and plastic earn in Wisconsin
What people already working in this job earn (BLS OEWS May 2025). Not graduate earnings.
U.S. median $48,750. Wisconsin pays above the national figure.
Concentrated here: Wisconsin employs more of this job per worker than the U.S. average.
Metro areas in Wisconsin
Job outlook
Bureau of Labor Statistics Employment Projections, 2024 to 2034.
Growth and openings are national. The Bureau of Labor Statistics does not publish employment projections at state level, so these figures describe the occupation across the whole U.S., not this state alone.
How to get in
The full skills, tools, and day-to-day breakdown lives on the national Heat Treating Equipment Setters, Operators, and Tenders, Metal and Plastic page.
How to become a Heat Treating Equipment Setter
Job zone 2 of 5 · SVP Below 6.0- Typical entry education
- High school diploma or equivalent
- On-the-job training
- Moderate-term on-the-job training
Usually requires a high school diploma or GED, though some occupations may not.
Some occupations may need little or no previous experience; others require several months to a year of experience. For example, landscaping and groundskeeping workers might require very little training or previous experience, while agricultural equipment operators can benefit from on-the job training.
Ranges from a few days to one year of on-the-job training.
Top skills
The same job in other states
Where else this occupation employs the most people, and what it pays there.
Related careers in Wisconsin
Every major mapped to this job
The official federal mapping behind the rankings above.
All 2 majors mapped to Heat Treating Equipment Setters, Operators, and Tenders, Metal and Plastic2 of them graduated someone in the latest IPEDS year. NCES CIP 2020 → SOC 2018 crosswalk.+
- 48.0501Machine Tool Technology/Machinist
- 48.0503Machine Shop Technology/Assistant
Common questions
Answers for people weighing heat treating equipment setters, operators, and tenders, metal and plastic programs in Wisconsin.
What degree do you need to become a Heat Treating Equipment Setter?+
High school diploma or equivalent is the typical entry-level education BLS reports for this occupation. The most common program people actually graduate from is Machine Tool Technology/Machinist, which awarded 142 degrees in Wisconsin in 2024-25, 60.4% of everyone graduating from a program that feeds this career.
Which college majors lead to becoming a Heat Treating Equipment Setter?+
The NCES CIP-to-SOC crosswalk maps 2 programs to this occupation. The largest are Precision Metal Working. Together they graduate about 235 people a year in Wisconsin.
How much do heat treating equipment setters, operators, and tenders, metal and plastic earn in Wisconsin?+
The median is $49,100 a year (BLS OEWS May 2025). That is 0.7% above the U.S. median of $48,750. This is pay for people already working in the occupation, not the same thing as graduate earnings one year after finishing a degree.
Is demand for heat treating equipment setters, operators, and tenders, metal and plastic growing?+
BLS projects a -12.8% change in employment between 2024 and 2034, decline, with roughly 1,200 openings a year nationally once retirements and job changes are counted.
How many schools offer programs for this career in Wisconsin?+
13 institutions in Wisconsin reported graduates from at least one of the 2 programs that feed this occupation in IPEDS 2024-25. Rankings on this page use graduates per year, because the federal data publishes no enrollment count by program.
What other job titles do heat treating equipment setters, operators, and tenders, metal and plastic work under?+
Employers advertise this work under many names. O*NET records Heat Treater, Furnace Operator, Heat Treat Operator, Heat Treat Technician among the most commonly reported, all mapping to SOC 51-4191.
About the data on this page
Rankings use IPEDS completions 2024–25, degrees awarded per year. That is the closest federal measure of how many people a program puts into a career, because no federal dataset publishes enrollment by program. Wages and employment come from BLS OEWS May 2025, growth and openings from BLS Employment Projections 2024-34, and which majors lead to which jobs from the NCES CIP 2020 to SOC 2018 crosswalk. Occupation descriptions, tasks, skills and tools are O*NET 30.3 (CC BY 4.0, U.S. Department of Labor/ETA).
BLS Occupational Employment & Wage Statistics
May 2025Wages, employment counts, location quotients and metro breakdowns.
BLS Employment Projections
2024–34Projected growth, annual openings and typical entry-level education.
IPEDS Completions
2024-25 (provisional)Graduates per year by program and institution — the ranking metric.
College Scorecard, Field of Study
2020-21 cohortsMedian graduate earnings one year after completion, and median debt.
Census Post-Secondary Employment Outcomes
latest availableGraduate earnings 1/5/10 years out, where the state participates.
NCES CIP 2020 and the CIP-to-SOC 2018 crosswalk
CIP 2020 / SOC 2018Which college programs officially lead to this occupation.
O*NET Database 30.3
30.3Tasks, skills, knowledge, tools, job zone and alternate job titles.
Official source →CC BY 4.0, U.S. Department of Labor / ETA
Explore every U.S. college in one conversation
Clema turns plain-language questions into sourced answers across every U.S. institution — earnings, aid, acceptance, graduation, safety, and athletics from IPEDS, College Scorecard, and 10+ federal datasets, built in.
Free for teams up to 3 · No credit card