Best Multiple Machine Tool Setter programs in South Carolina, ranked by enrollment
Set up, operate, or tend more than one type of cutting or forming machine tool or.
13 schools in South Carolina run programs that feed this job, graduating 298 people a year. The job pays a median of $45,740 in South Carolina across about 4,520 jobs (BLS OEWS May 2025).
Fields of study in South Carolina that lead to this job
Grouped at the 4-digit CIP level. Numbers are graduates per year in this state.
2 programs in South Carolina that lead to this job
Ranked by graduates per year in South Carolina (IPEDS completions). Graduate earnings and debt are national College Scorecard figures reported at the 4-digit CIP level, so specializations within one field share a figure. Each program also links to its own South Carolina page.
| # | Program | Graduates / yr | Share of pipeline | Schools | Grad earnings (1 yr) | Median debt |
|---|---|---|---|---|---|---|
| 1 | CIP 48.0501In South Carolina → | 285 | 95.6% | 13 | $36,566 | $9,429 |
| 2 | CIP 48.0503In South Carolina → | 13 | 4.4% | 1 | $36,566 | $9,429 |
Top 13 schools in South Carolina
Ranked by graduates per year into this job. Graduate earnings are reported for 8 of the 13 schools in this state.
| # | School | Graduates / yr | Top feeder program | Grad earnings (1 yr) | Grad rate | Net price | Acceptance |
|---|---|---|---|---|---|---|---|
| 1 | Tri - County Technical College Pendleton, SC Public · 1 feeder programs | 61 | Machine Tool Technology/Machinist | — | 42% | — | — |
| 2 | Piedmont Technical College Greenwood, SC Public · 2 feeder programs | 59 | Machine Tool Technology/Machinist | $34,928 | 33% | — | — |
| 3 | Florence - Darlington Technical College Florence, SC Public · 1 feeder programs | 46 | Machine Tool Technology/Machinist | $34,948 | 34% | — | — |
| 4 | Northeastern Technical College Cheraw, SC Public · 1 feeder programs | 34 | Machine Tool Technology/Machinist | — | 21% | — | — |
| 5 | Spartanburg Community College Spartanburg, SC Public · 1 feeder programs | 25 | Machine Tool Technology/Machinist | $38,147 | 28% | — | — |
| 6 | Greenville Technical College Greenville, SC Public · 1 feeder programs | 15 | Machine Tool Technology/Machinist | $34,761 | 21% | — | — |
| 7 | Midlands Technical College West Columbia, SC Public · 1 feeder programs | 14 | Machine Tool Technology/Machinist | $47,556 | 18% | — | — |
| 8 | Horry - Georgetown Technical College Conway, SC Public · 1 feeder programs | 13 | Machine Tool Technology/Machinist | $33,002 | 38% | — | — |
| 9 | Trident Technical College Charleston, SC Public · 1 feeder programs | 10 | Machine Tool Technology/Machinist | — | 30% | — | — |
| 10 | Central Carolina Technical College Sumter, SC Public · 1 feeder programs | 8 | Machine Tool Technology/Machinist | $32,196 | 34% | — | — |
| 11 | York Technical College Rock Hill, SC Public · 1 feeder programs | 7 | Machine Tool Technology/Machinist | $50,309 | 30% | — | — |
| 12 | Orangeburg Calhoun Technical College Orangeburg, SC Public · 1 feeder programs | 5 | Machine Tool Technology/Machinist | — | 32% | — | — |
| 13 | Aiken Technical College Graniteville, SC Public · 1 feeder programs | 1 | Machine Tool Technology/Machinist | — | 34% | — | — |
All 13 schools in South Carolina
Every school in South Carolina with a program that feeds this job, ordered by graduates per year. Earnings are shown for the ranked schools above; open a school profile for the rest.
| School | City | Control | Graduates / yr | Feeder programs |
|---|---|---|---|---|
| Tri - County Technical College | Pendleton | Public | 61 | 1 |
| Piedmont Technical College | Greenwood | Public | 59 | 2 |
| Florence - Darlington Technical College | Florence | Public | 46 | 1 |
| Northeastern Technical College | Cheraw | Public | 34 | 1 |
| Spartanburg Community College | Spartanburg | Public | 25 | 1 |
| Greenville Technical College | Greenville | Public | 15 | 1 |
| Midlands Technical College | West Columbia | Public | 14 | 1 |
| Horry - Georgetown Technical College | Conway | Public | 13 | 1 |
| Trident Technical College | Charleston | Public | 10 | 1 |
| Central Carolina Technical College | Sumter | Public | 8 | 1 |
| York Technical College | Rock Hill | Public | 7 | 1 |
| Orangeburg Calhoun Technical College | Orangeburg | Public | 5 | 1 |
| Aiken Technical College | Graniteville | Public | 1 | 1 |
What multiple machine tool setters, operators, and tenders, metal and plastic earn in South Carolina
What people already working in this job earn (BLS OEWS May 2025). Not graduate earnings.
U.S. median $47,180. South Carolina pays below the national figure.
Concentrated here: South Carolina employs more of this job per worker than the U.S. average.
Metro areas in South Carolina
Job outlook
Bureau of Labor Statistics Employment Projections, 2024 to 2034.
Growth and openings are national. The Bureau of Labor Statistics does not publish employment projections at state level, so these figures describe the occupation across the whole U.S., not this state alone.
How to get in
The full skills, tools, and day-to-day breakdown lives on the national Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic page.
How to become a Multiple Machine Tool Setter
Job zone 2 of 5 · SVP Below 6.0- Typical entry education
- High school diploma or equivalent
- On-the-job training
- Moderate-term on-the-job training
Usually requires a high school diploma or GED, though some occupations may not.
Some occupations may need little or no previous experience; others require several months to a year of experience. For example, landscaping and groundskeeping workers might require very little training or previous experience, while agricultural equipment operators can benefit from on-the job training.
Ranges from a few days to one year of on-the-job training.
Top skills
The same job in other states
Where else this occupation employs the most people, and what it pays there.
Related careers in South Carolina
Every major mapped to this job
The official federal mapping behind the rankings above.
All 2 majors mapped to Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic2 of them graduated someone in the latest IPEDS year. NCES CIP 2020 → SOC 2018 crosswalk.+
- 48.0501Machine Tool Technology/Machinist
- 48.0503Machine Shop Technology/Assistant
Common questions
Answers for people weighing multiple machine tool setters, operators, and tenders, metal and plastic programs in South Carolina.
What degree do you need to become a Multiple Machine Tool Setter?+
High school diploma or equivalent is the typical entry-level education BLS reports for this occupation. The most common program people actually graduate from is Machine Tool Technology/Machinist, which awarded 285 degrees in South Carolina in 2024-25, 95.6% of everyone graduating from a program that feeds this career.
Which college majors lead to becoming a Multiple Machine Tool Setter?+
The NCES CIP-to-SOC crosswalk maps 2 programs to this occupation. The largest are Precision Metal Working. Together they graduate about 298 people a year in South Carolina.
How much do multiple machine tool setters, operators, and tenders, metal and plastic earn in South Carolina?+
The median is $45,740 a year (BLS OEWS May 2025). That is 3.1% below the U.S. median of $47,180. This is pay for people already working in the occupation, not the same thing as graduate earnings one year after finishing a degree.
Is demand for multiple machine tool setters, operators, and tenders, metal and plastic growing?+
BLS projects a -0.5% change in employment between 2024 and 2034, little or no change, with roughly 12,800 openings a year nationally once retirements and job changes are counted.
How many schools offer programs for this career in South Carolina?+
13 institutions in South Carolina reported graduates from at least one of the 2 programs that feed this occupation in IPEDS 2024-25. Rankings on this page use graduates per year, because the federal data publishes no enrollment count by program.
What other job titles do multiple machine tool setters, operators, and tenders, metal and plastic work under?+
Employers advertise this work under many names. O*NET records Cell Technician, Machine Operator, Machine Technician, CNC Machine Setter (Computer Numerically Controlled Machine Setter) among the most commonly reported, all mapping to SOC 51-4081.
About the data on this page
Rankings use IPEDS completions 2024–25, degrees awarded per year. That is the closest federal measure of how many people a program puts into a career, because no federal dataset publishes enrollment by program. Wages and employment come from BLS OEWS May 2025, growth and openings from BLS Employment Projections 2024-34, and which majors lead to which jobs from the NCES CIP 2020 to SOC 2018 crosswalk. Occupation descriptions, tasks, skills and tools are O*NET 30.3 (CC BY 4.0, U.S. Department of Labor/ETA).
BLS Occupational Employment & Wage Statistics
May 2025Wages, employment counts, location quotients and metro breakdowns.
BLS Employment Projections
2024–34Projected growth, annual openings and typical entry-level education.
IPEDS Completions
2024-25 (provisional)Graduates per year by program and institution — the ranking metric.
College Scorecard, Field of Study
2020-21 cohortsMedian graduate earnings one year after completion, and median debt.
Census Post-Secondary Employment Outcomes
latest availableGraduate earnings 1/5/10 years out, where the state participates.
NCES CIP 2020 and the CIP-to-SOC 2018 crosswalk
CIP 2020 / SOC 2018Which college programs officially lead to this occupation.
O*NET Database 30.3
30.3Tasks, skills, knowledge, tools, job zone and alternate job titles.
Official source →CC BY 4.0, U.S. Department of Labor / ETA
Explore every U.S. college in one conversation
Clema turns plain-language questions into sourced answers across every U.S. institution — earnings, aid, acceptance, graduation, safety, and athletics from IPEDS, College Scorecard, and 10+ federal datasets, built in.
Free for teams up to 3 · No credit card