Best Calibration Technologist programs in Georgia, ranked by enrollment
Execute or adapt procedures and techniques for calibrating measurement devices, by applying knowledge of measurement science, mathematics, physics, chemistry, and electronics, sometimes under the direction of engineering staff.
15 schools in Georgia run programs that feed this job, graduating 226 people a year. The job pays a median of $66,730 in Georgia across about 140 jobs (BLS OEWS May 2025).
Fields of study in Georgia that lead to this job
Grouped at the 4-digit CIP level. Numbers are graduates per year in this state.
2 programs in Georgia that lead to this job
Ranked by graduates per year in Georgia (IPEDS completions). Graduate earnings and debt are national College Scorecard figures reported at the 4-digit CIP level, so specializations within one field share a figure. Each program also links to its own Georgia page.
| # | Program | Graduates / yr | Share of pipeline | Schools | Grad earnings (1 yr) | Median debt |
|---|---|---|---|---|---|---|
| 1 | CIP 15.0303In Georgia → | 166 | 73.5% | 14 | $59,859 | $15,372 |
| 2 | CIP 15.0404In Georgia → | 60 | 26.5% | 3 | $60,286 | $15,383 |
Top 15 schools in Georgia
Ranked by graduates per year into this job. Graduate earnings are reported for 3 of the 15 schools in this state.
All 15 schools in Georgia
Every school in Georgia with a program that feeds this job, ordered by graduates per year. Earnings are shown for the ranked schools above; open a school profile for the rest.
| School | City | Control | Graduates / yr | Feeder programs |
|---|---|---|---|---|
| Georgia Northwestern Technical College | Rome | Public | 62 | 2 |
| Kennesaw State University | Kennesaw | Public | 29 | 1 |
| Chattahoochee Technical College | Marietta | Public | 22 | 1 |
| Gwinnett Technical College | Lawrenceville | Public | 21 | 1 |
| Athens Technical College | Athens | Public | 19 | 1 |
| Central Georgia Technical College | Warner Robins | Public | 18 | 2 |
| Augusta Technical College | Augusta | Public | 15 | 1 |
| Fort Valley State University | Fort Valley | Public | 10 | 1 |
| Georgia Piedmont Technical College | Clarkston | Public | 8 | 1 |
| Savannah State University | Savannah | Public | 8 | 1 |
| Lanier Technical College | Gainesville | Public | 6 | 1 |
| Savannah Technical College | Savannah | Public | 4 | 1 |
| DeVry University - Georgia | Decatur | Private for-profit | 2 | 1 |
| Albany Technical College | Albany | Public | 1 | 1 |
| West Georgia Technical College | Waco | Public | 1 | 1 |
What calibration technologists and technicians earn in Georgia
What people already working in this job earn (BLS OEWS May 2025). Not graduate earnings.
U.S. median $67,820. Georgia pays below the national figure.
1.00× means the state has its expected share of these jobs.
Metro areas in Georgia
Job outlook
Bureau of Labor Statistics Employment Projections, 2024 to 2034.
Growth and openings are national. The Bureau of Labor Statistics does not publish employment projections at state level, so these figures describe the occupation across the whole U.S., not this state alone.
How to get in
The full skills, tools, and day-to-day breakdown lives on the national Calibration Technologists and Technicians page.
How to become a Calibration Technologist
Job zone 3 of 5 · SVP 6.0 to < 7.0- Typical entry education
- Associate's degree
Most occupations in this zone require training in vocational schools, related on-the-job experience, or an associate's degree.
Previous work-related skill, knowledge, or experience is required for these occupations. For example, an electrician must have completed three or four years of apprenticeship or several years of vocational training, and often must have passed a licensing exam, in order to perform the job.
Employees in these occupations usually need one or two years of training involving both on-the-job experience and informal training with experienced workers. A recognized apprenticeship program may be associated with these occupations.
The same job in other states
Where else this occupation employs the most people, and what it pays there.
Related careers in Georgia
Every major mapped to this job
The official federal mapping behind the rankings above.
All 3 majors mapped to Calibration Technologists and Technicians3 of them graduated someone in the latest IPEDS year. NCES CIP 2020 → SOC 2018 crosswalk.+
- 15.0303Electrical, Electronic, and Communications Engineering Technology/Technician
- 15.0401Biomedical Technology/Technician
- 15.0404Instrumentation Technology/Technician
Common questions
Answers for people weighing calibration technologists and technicians programs in Georgia.
What degree do you need to become a Calibration Technologist?+
Associate's degree is the typical entry-level education BLS reports for this occupation. The most common program people actually graduate from is Electrical, Electronic, and Communications Engineering Technology/Technician, which awarded 166 degrees in Georgia in 2024-25, 73.5% of everyone graduating from a program that feeds this career.
Which college majors lead to becoming a Calibration Technologist?+
The NCES CIP-to-SOC crosswalk maps 2 programs to this occupation. The largest are Electrical/Electronic Engineering Technologies/Technicians, Electromechanical Technologies/Technicians. Together they graduate about 226 people a year in Georgia.
How much do calibration technologists and technicians earn in Georgia?+
The median is $66,730 a year (BLS OEWS May 2025). That is 1.6% below the U.S. median of $67,820. This is pay for people already working in the occupation, not the same thing as graduate earnings one year after finishing a degree.
Is demand for calibration technologists and technicians growing?+
BLS projects a +4.7% change in employment between 2024 and 2034, about as fast as average, with roughly 1,400 openings a year nationally once retirements and job changes are counted.
How many schools offer programs for this career in Georgia?+
15 institutions in Georgia reported graduates from at least one of the 2 programs that feed this occupation in IPEDS 2024-25. Rankings on this page use graduates per year, because the federal data publishes no enrollment count by program.
Do you need training or experience beyond a degree?+
BLS lists 'None' for related work experience and 'None' for on-the-job training typically needed to reach competency.
About the data on this page
Rankings use IPEDS completions 2024–25, degrees awarded per year. That is the closest federal measure of how many people a program puts into a career, because no federal dataset publishes enrollment by program. Wages and employment come from BLS OEWS May 2025, growth and openings from BLS Employment Projections 2024-34, and which majors lead to which jobs from the NCES CIP 2020 to SOC 2018 crosswalk. Occupation descriptions, tasks, skills and tools are O*NET 30.3 (CC BY 4.0, U.S. Department of Labor/ETA).
BLS Occupational Employment & Wage Statistics
May 2025Wages, employment counts, location quotients and metro breakdowns.
BLS Employment Projections
2024–34Projected growth, annual openings and typical entry-level education.
IPEDS Completions
2024-25 (provisional)Graduates per year by program and institution — the ranking metric.
College Scorecard, Field of Study
2020-21 cohortsMedian graduate earnings one year after completion, and median debt.
Census Post-Secondary Employment Outcomes
latest availableGraduate earnings 1/5/10 years out, where the state participates.
NCES CIP 2020 and the CIP-to-SOC 2018 crosswalk
CIP 2020 / SOC 2018Which college programs officially lead to this occupation.
O*NET Database 30.3
30.3Tasks, skills, knowledge, tools, job zone and alternate job titles.
Official source →CC BY 4.0, U.S. Department of Labor / ETA
Explore every U.S. college in one conversation
Clema turns plain-language questions into sourced answers across every U.S. institution — earnings, aid, acceptance, graduation, safety, and athletics from IPEDS, College Scorecard, and 10+ federal datasets, built in.
Free for teams up to 3 · No credit card